Ex­tremeTrans­ac­tions 6.0

Sup­port for both javax and jakar­ta EE

Added sup­port for Jakar­ta EE, Spring Boot 3 and Hiber­nate 6.

Up­grad­ing from 5.0 to 6.0

This re­lease was very hard to do. Not be­cause we want­ed many new fea­tures in­clud­ed (there are not that many, ac­tu­al­ly), but rather be­cause it was a bal­anc­ing act be­tween sta­bil­i­ty / back­wards com­pat­i­bil­i­ty and new "break­ing change" emerg­ing plat­forms (specif­i­cal­ly: Spring Boot 3, Hiber­nate 6 and their de­pen­den­cies on Jakar­taEE and very re­cent Java ver­sions).

We think we did a good job: just like the pre­vi­ous re­lease 5.0, this new re­lease can run on "good old" Java 8 for most mod­ules, ex­cept for Spring Boot 3 in­te­gra­tion (which re­quires Java 17 as per Spring Boot) and Hiber­nate 6. So if your ap­pli­ca­tion worked with re­lease 5.0 then it should still work, pro­vid­ed that you do the fol­low­ing:

Add ex­tra de­pen­den­cies ex­plic­it­ly to your POM

We now sup­port both javax and jakar­ta name­spaces for the Java en­ter­prise APIs, by of­fer­ing reg­u­lar jars as well as "jakar­ta" jars (with the cor­re­spond­ing clas­si­fi­er in the jar names). Th­ese jakar­ta jars are gen­er­at­ed at build time with the Eclipse trans­former util­i­ty.

In or­der to do this, we had to break the tran­si­tive de­pen­den­cy mech­a­nism (which, in­ci­den­tal­ly, also avoids pulling in vul­ner­a­ble 3rd par­ty code libs). So: ex­cept for Spring Boot 3 apps, this means that you will now have to add the fol­low­ing de­pen­den­cy to your pom file (or you risk fac­ing ClassNotFoundEx­cep­tions):

The tra­di­tion­al javax style

    <dependency>
         <groupId>com.atomikos</groupId>
         <artifactId>transactions-jta</artifactId>
         <version>6.0.109</version> <!-- Commercial, for open source use version 6.0.0 -->
    </dependency>

     <dependency>
         <groupId>jakarta.jms</groupId>
         <artifactId>jakarta.jms-api</artifactId> 
         <!-- NOTE: despite "jakarta" in the name, this version is still a javax jar -->
         <version>2.0.3</version>
     </dependency>

     <dependency>
         <groupId>javax.transaction</groupId>
         <artifactId>jta</artifactId>
         <version>1.1</version>
      </dependency>

The new jakar­ta style

      <dependency>
         <groupId>com.atomikos</groupId>
         <artifactId>transactions-jta</artifactId>
         <version>6.0.109</version> <!-- Commercial, for open source use version 6.0.0 -->
         <classifier>jakarta</classifier>
      </dependency>

      <dependency>
         <groupId>jakarta.jms</groupId>
         <artifactId>jakarta.jms-api</artifactId>
         <version>3.1.0</version>
      </dependency>

      <dependency>
         <groupId>jakarta.transaction</groupId>
         <artifactId>jakarta.transaction-api</artifactId>
         <version>2.0.1</version>
      </dependency>

Over­ride the new JMS be­hav­iour to re­vert to pri­or re­lease be­hav­iour

We now sup­port JMS 2. This re­quired some changes to the JMS ses­sion cre­ation be­hav­iour, so if you rely on the "old" JMS be­hav­iour then set the fol­low­ing prop­er­ty on the AtomikosCon­nec­tionFac­to­ryBean:

     AtomikosConnectionFactoryBean cf = new AtomikosConnectionFactoryBean();
     // 1 sets behaviour like in releases 3.9-5.0, 0 sets behaviour like in releases pre-3.9
     cf.setSessionCreationMode(1); 

For more de­tails, see the javadoc of the AtomikosCon­nec­tionFac­to­ryBean class.

Drop any reapTime­out prop­er­ty

We've re­moved reap func­tion­al­i­ty from the pool, so re­move any reapTime­out prop­er­ty in your data­source or con­nec­tion fac­to­ry con­fig.

Up­date your hazel­cast de­pen­den­cies

We've re­moved the need for a sep­a­rate mod­ule trans­ac­tions-hazel­cast4. This mod­ule is now in­cor­po­rat­ed in the gener­ic trans­ac­tions-hazel­cast so up­date any de­pen­den­cies ac­cord­ing­ly.

Run­time de­pen­den­cies are min­i­mal­is­tic

Con­cern­ing se­cu­ri­ty and vul­ner­a­bil­i­ties: the fol­low­ing are the run­time de­pen­den­cies of our prod­uct. As you can see, the only tran­si­tive 3rd par­ty de­pen­den­cies are for Spring Boot in­te­gra­tion - be­cause that's the only way to in­te­grate with Spring Boot. All oth­er mod­ules / jars have no 3rd par­ty jar de­pen­den­cies what­so­ev­er.

[INFO] --- maven-dependency-plugin:2.8:tree (default-cli) @ ExtremeTransactionsForMaven ---
[INFO] com.atomikos:ExtremeTransactionsForMaven:pom:6.0.109
[INFO] +- com.atomikos:subscription:jar:6.0.109:compile
[INFO] |  \- com.atomikos:atomikos-util:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-essentials:pom:6.0.109:compile
[INFO] +- com.atomikos:transactions-essentials-jakarta:pom:6.0.109:compile
[INFO] +- com.atomikos:extreme-transactions:pom:6.0.109:compile
[INFO] +- com.atomikos:extreme-transactions-jakarta:pom:6.0.109:compile
[INFO] +- com.atomikos:transactions-monitoring-stderr:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-monitoring-logs:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-logcloud:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-allegrograph:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-remoting:jar:6.0.109:compile
[INFO] |  \- com.atomikos:transactions:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-remoting:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-osgi:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-osgi:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-logutil:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-osgi-axt:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-osgi-axt:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-jsp:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-jsp:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-jdbc:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-jdbc:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-jms:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-jms:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-jta:jar:6.0.109:compile
[INFO] |  \- com.atomikos:transactions-api:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-jta:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-jmx:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-hibernate2:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-hibernate3:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-hibernate4:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-hibernate4:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-eclipselink:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-tomcat:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-spring:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-spring:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-spring-boot:jar:6.0.109:compile
[INFO] |  +- org.springframework:spring-tx:jar:5.2.9.RELEASE:compile
[INFO] |  |  +- org.springframework:spring-beans:jar:5.2.9.RELEASE:compile
[INFO] |  |  \- org.springframework:spring-core:jar:5.2.9.RELEASE:compile
[INFO] |  |     \- org.springframework:spring-jcl:jar:5.2.9.RELEASE:compile
[INFO] |  \- org.springframework.boot:spring-boot:jar:2.3.4.RELEASE:compile
[INFO] |     \- org.springframework:spring-context:jar:5.2.9.RELEASE:compile
[INFO] |        +- org.springframework:spring-aop:jar:5.2.9.RELEASE:compile
[INFO] |        \- org.springframework:spring-expression:jar:5.2.9.RELEASE:compile
[INFO] +- com.atomikos:transactions-spring-boot-starter:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-spring-boot3:jar:6.0.109:compile
[INFO] |  +- jakarta.jms:jakarta.jms-api:jar:3.1.0:compile
[INFO] |  \- jakarta.transaction:jakarta.transaction-api:jar:2.0.1:compile
[INFO] +- com.atomikos:transactions-spring-boot3-starter:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-hazelcast:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-jndi-provider:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-jndi-provider:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-monitoring:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-remoting-recovery:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-remoting-recovery:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-spring-boot-logcloud:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-opentracing:jar:6.0.109:compile
[INFO] +- com.atomikos:transactions-opentracing:jar:jakarta:6.0.109:compile
[INFO] +- com.atomikos:transactions-micrometer:jar:6.0.109:compile
[INFO] \- com.atomikos:transactions-micrometer:jar:jakarta:6.0.109:compile

De­tailed re­lease notes

If you like the nit­ty grit­ty de­tails, then the fol­low­ing sec­tions are for you!

Fea­ture199869

Spring Boot 3 Starter

We added a starter for Spring Boot 3.

Tech­ni­cal de­tails

Spring Boot 3 has made a "big bang" up­grade to Jakar­ta EE and Java 17, with all com­pli­ca­tions in­volved. You can now use Atomikos with Spring Boot 3 by means of our new Spring Boot 3 starter mod­ule.

Changes im­pact­ing client API

Spring Boot 3 re­quires Java 17 or high­er, plus all Jakar­taEE li­braries (and for course Atomikos re­leas­es 6.0 or high­er). Note that this means you will also need Jakar­taEE JMS dri­vers, and Jakar­taEE per­sis­tence providers. Hur­ray.

You need the fol­low­ing de­pen­den­cy to use Spring Boot 3:

      <dependency>
         <groupId>com.atomikos</groupId>
         <artifactId>transactions-spring-boot3-starter</artifactId>
         <version>6.0.109</version>
      </dependency>

For the Jakar­taEE JMS and JTA APIs: we've added those to the Spring Boot 3 starter mod­ule al­ready - so you don't have to both­er.

Fea­ture197500

Sup­port Jakar­taEE li­braries and pack­ages

De­scrip­tion

We now also sup­port Jakar­taEE (in ad­di­tion to the "old" JEE with javax name­spaces).

Tech­ni­cal de­tails

All rel­e­vant mod­ules are now avail­able in both a tra­di­tion­al vari­ant and a Jakar­taEE vari­ant, the lat­ter gen­er­at­ed with the Eclipse trans­former util­i­ty dur­ing the build. Jakar­taEE jars car­ry the same name as their tra­di­tion­al coun­ter­parts, but have the ad­di­tion­al clas­si­fi­er "jakar­ta" in the jar file name to dis­tin­guish them.

The choice for this strat­e­gy was heav­i­ly dri­ven by our de­sire to still sup­port Java 8 ap­pli­ca­tions that can't up­grade to Java 17 or Jakar­taEE right now.

The pre­vi­ous state­ment prob­a­bly de­serves some ex­pla­na­tion: af­ter some ini­tial at­tempts it was painful­ly clear to us that up­grad­ing from Java 8 to Java 17 is noth­ing short of a night­mare.

[Oh and by the way, we fig­ure that this is the rea­son why ex­tend­ed sup­port for Java 8 is avail­able un­til 2030, the longest of all Java ver­sions at the time of pub­li­ca­tion. Yes, that means Java 8 should be sup­port­ed for longer than Java 17 - go fig­ure that!]

Our cho­sen ap­proach should al­low ex­ist­ing in­stal­la­tions to up­grade to our 6.0 re­lease with­out the need to up­grade to Jakar­taEE and/or Java 17 at the same time.

Past ex­pe­ri­ence with our cus­tomers has shown that even a "sim­ple" up­grade from Java 6 to Java 8 can be a huge road­block - es­pe­cial­ly if the de­vel­op­ment team is gone and only op­er­a­tions teams are left. So we pre­fer to keep up­grad­ing a seam­less and straight­for­ward process, with­out re­quir­ing need­less Java up­dates at the same time. We are sure that you will ap­pre­ci­ate that.

The "down­side" of this choice is that you can no longer count on tran­si­tive de­pen­den­cies as much as you did, be­cause many mod­ules now have 2 vari­ants avail­able (and hence the tran­si­tive de­pen­den­cies would not nec­es­sar­i­ly match the right vari­ant). While this may seem a dis­ad­van­tage, it ac­tu­al­ly in­creas­es se­cu­ri­ty be­cause there are no longer tran­si­tive de­pen­den­cies on 3rd par­ty jars ei­ther (so you avoid pulling in vul­ner­a­bil­i­ties).

So: you have to add some de­pen­den­cies man­u­al­ly that were tran­si­tive be­fore. But the ef­fort re­quired is sig­nif­i­cant­ly low­er than the ef­fort it would take to up­grade your code base to­wards Java 17 and Jakar­taEE all at once.

Changes im­pact­ing client API

As ex­plained in the up­grade sec­tion above: you need to de­clare some ex­tra de­pen­den­cies. Also, you have to be care­ful to use the right com­bi­na­tion of Jakar­ta-en­abled jars in your ap­pli­ca­tion. To this end, we have de­fined BOM files that list all the jars de­signed to work to­geth­er:

• trans­ac­tions-es­sen­tials ver­sus trans­ac­tions-es­sen­tials-jakar­ta
• ex­treme-trans­ac­tions ver­sus ex­treme-trans­ac­tions-jakar­ta

You can check these BOMs for in­spi­ra­tion on which jars to use / com­bine in your ap­pli­ca­tion. If you are cu­ri­ous where to find them: check groupId=com.atom­ikos and ar­ti­fac­tId=name_of_BOM_­file.

Fea­ture199608

Hiber­nate 6 sup­port

De­scrip­tion

You can now eas­i­ly use Hiber­nate 6 in com­bi­na­tion with our prod­uct!

Tech­ni­cal de­tails

Hiber­nate 6 is also in the Jakar­taEE camp, so of course you need Jakar­taEE sup­port to be able to use it. Well, as we've ex­plained above: we have done just that.

To use Hiber­nate 6, it suf­fices to use trans­ac­tions-hi­ber­nate4 in the jakar­ta flavour.

For a work­ing sam­ple: check the sup­plied ex­am­ples project called ex­am­ples-hi­ber­nate6 or see the sum­ma­ry POM snip­pet be­low.

Changes im­pact­ing client API

No real changes are need­ed, but you do have to add the cor­rect POM de­pen­den­cies:

      <dependency>
         <groupId>com.atomikos</groupId>
         <artifactId>transactions-hibernate4</artifactId>
         <version>6.0.109</version>
         <classifier>jakarta</classifier>
      </dependency>
      <dependency>
         <groupId>com.atomikos</groupId>
         <artifactId>transactions-jdbc</artifactId>
         <version>6.0.109</version>                                              
         <classifier>jakarta</classifier>
      </dependency>
      <dependency>
         <groupId>com.atomikos</groupId>
         <artifactId>transactions-jta</artifactId>
         <version>6.0.109</version>
         <classifier>jakarta</classifier>
      </dependency>
      <dependency>
         <groupId>jakarta.transaction</groupId>
         <artifactId>jakarta.transaction-api</artifactId>
         <version>2.0.1</version>
      </dependency>
      <dependency>
         <groupId>jakarta.persistence</groupId>
         <artifactId>jakarta.persistence-api</artifactId>
         <version>3.1.0</version>
      </dependency>

Of course, you also need the Hiber­nate 6 de­pen­den­cies them­selves - but we'll leave that up to you...

Fea­ture85601

JMS 2.0 sup­port

De­scrip­tion

We now have (min­i­mal) sup­port for JMS 2.0.

Tech­ni­cal de­tails

As re­quired by Jakar­taEE and Spring Boot 3, we need­ed some sup­port for JMS 2.0. For the sake of re­leas­ing on time, this sup­port is only par­tial: we do not yet sup­port the new JMSCon­text API. Spring Boot 3 does not seem to need it, so that should be fine for now. At­tempt­ing to call any of the cre­ateCon­text meth­ods on the AtomikosCon­nec­tionFac­to­ryBean will throw Un­sup­port­edOper­a­tionEx­cep­tion.

Changes im­pact­ing client API

Ses­sion cre­ation be­hav­iour has changed due to the clar­i­fi­ca­tion of ses­sion cre­ation be­hav­iour in JMS 2.0 (which is in­com­pat­i­ble with what we had in pri­or re­leas­es). As you can see in the ta­ble be­low, the dif­fer­ences are in the com­bined in­ter­pre­ta­tion of:

• a JTA trans­ac­tion be­ing present on the call­ing thread or not,
• the val­ue set for lo­calTrans­ac­tionMode and
• the val­ue of the ses­sionTrans­act­ed flag when cre­at­ing a ses­sion.

Pri­or to JMS 2.0, ses­sion cre­ation had some fuzzy bor­der cas­es where the in­ter­pre­ta­tion was left to the par­ty im­ple­ment­ing the specs (like Atomikos). In JMS 2.0 this has been ad­dressed. Need­less to say, the prob­a­bly of a per­fect match with our in­ter­pre­ta­tion was next to zero - so we had to make some changes.

To pre­serve com­pat­i­bil­i­ty your in­stances of AtomikosCon­nec­tionFac­to­ryBean now of­fer an ex­tra method setSes­sionCreationMode(int mode) which changes be­hav­iour as de­scribed be­low. The de­fault is val­ue 2 (JMS 2.0) so for com­pat­i­bil­i­ty with 5.0, try val­ue 1. For com­pat­i­bil­i­ty with pre-3.9 in­stal­la­tions, try val­ue 0.

Ses­sionCreationMode.JMS_2_0 (the de­fault as of re­lease 6.0), re­solv­ing to con­stant val­ue 2

ex­ist­ing JTA trans­ac­tion for thread	lo­calTrans­ac­tionMode	re­sult­ing ses­sion
true	ig­nored	XA ses­sion
false	false	XA ses­sion
false	true	non-XA ses­sion ac­cord­ing to ses­sionTrans­act­ed/ac­knowl­edgeMode pa­ra­me­ters

Ses­sionCreationMode.PRE_6_0 (op­tion­al, for back­ward com­pat­i­bil­i­ty) - re­solv­ing to con­stant val­ue 1

lo­calTrans­ac­tionMode	ses­sionTrans­act­edFlag	re­sult­ing ses­sion
false	ig­nored	XA ses­sion
true	ig­nored	non-XA ses­sion ac­cord­ing to ses­sionTrans­act­ed/ac­knowl­edgeMode pa­ra­me­ters

Ses­sionCreationMode.PRE_3_9 (op­tion­al, for back­ward com­pat­i­bil­i­ty and equiv­a­lent to ig­noreSes­sionTrans­act­edFlag = false) - re­solv­ing to con­stant val­ue 0

lo­calTrans­ac­tionMode	ses­sionTrans­act­edFlag	re­sult­ing ses­sion
false	true	XA ses­sion
oth­er	oth­er	non-XA ses­sion ac­cord­ing to ses­sionTrans­act­ed/ac­knowl­edgeMode pa­ra­me­ters

You can also find this in the javadoc of the AtomikosCon­nec­tionFac­to­ryBean.

Fea­ture20711

Sup­port for Trans­ac­tionSyn­chro­niza­tionRegistry

De­scrip­tion

We now of­fer an im­ple­men­ta­tion of Trans­ac­tionSyn­chro­niza­tionRegistry de­fined in the more re­cent JTA spec­i­fi­ca­tions.

Tech­ni­cal de­tails

You can use an in­stance of com.atom­ikos.icatch.jta.Trans­ac­tionSyn­chro­niza­tionRegistryImp con­tained in mod­ule trans­ac­tions-jta.jar.

Un­less you are a ven­dor of per­sis­tence providers, you prob­a­bly won't ever need this class so we'll keep the ex­pla­na­tion to a min­i­mum - since ven­dors of per­sis­tence providers al­ready know all there is to know.

Changes im­pact­ing client API

An ex­tra class avail­able in our dis­tri­b­u­tion, for you to use if you want to.

Fea­ture199530

Make the trans­ac­tion tem­plate thread-safe

De­scrip­tion

In­stances of com.atom­ikos.icatch.jta.tem­plate.Trans­ac­tionTem­plate are now tread-safe.

Tech­ni­cal de­tails

The first im­ple­men­ta­tions of our tem­plate were not in­tend­ed for thread­ed use cas­es. Based on cus­tomer feed­back, we have changed that - so you can now reuse the same in­stance in dif­fer­ent threads - just like Spring's tem­plate.

Changes im­pact­ing client API

In­stead of hav­ing to cre­ate mul­ti­ple tem­plate in­stances, you can now reuse the same in­stance in dif­fer­ent places of your code base. This should sim­pli­fy your con­fig­u­ra­tion and code base.

Fea­ture192016

Bet­ter sup­port for bor­rowCon­nec­tion time­outs in the pool

De­scrip­tion

We've im­proved the pool log­ic so that bor­row re­quests can bet­ter re­spect the time­out.

Tech­ni­cal de­tails

When a con­nec­tion is re­quest­ed and none is avail­able, new con­nec­tions would be cre­at­ed in the ap­pli­ca­tion's thread. In case of net­work is­sues, this would block the ap­pli­ca­tion's thread, pos­si­bly for much longer than the bor­rowCon­nec­tionTime­out set­ting would (and should) al­low. That's be­cause there is no easy way to in­ter­rupt a blocked IO re­quest.

We now im­proved this as fol­lows:

• There is a sep­a­rate back­ground thread that grows the pool when need­ed.
• The ap­pli­ca­tion's thread waits for this thread to grow the pool, but no longer than spec­i­fied by bor­rowCon­nec­tionTime­out.

Changes im­pact­ing client API

No real changes are need­ed, ex­cept that it should work bet­ter.

Fea­ture189885

Re­fac­tor shut­down: im­prove wait­ing for in-flight trans­ac­tions

De­scrip­tion

We have sim­pli­fied and im­proved the shut­down log­ic.

Tech­ni­cal de­tails

Shut­down used to wait for a time­out bound by the val­ue of com.atom­ikos.icatch.de­fault­_­max_wait­_­time_on_shut­down. Re­cov­ery it­self is al­ready bound by a dif­fer­ent pa­ra­me­ter: com.atom­ikos.icatch.de­fault­_­max_­time­out. The pre­vi­ous log­ic used to mix those two and the re­sults were not al­ways clear.

We have sim­pli­fied this to the fol­low­ing:

• Shut­down waits for all ac­tive trans­ac­tions to fin­ish in the JVM.
• Then it per­forms a re­cov­ery pass to clean up as much as pos­si­ble.
• If both pre­vi­ous steps worked fine then there are no pend­ing trans­ac­tions and the trans­ac­tion log files can be delet­ed.
• On the oth­er hand, if ei­ther step has is­sues then the trans­ac­tion log files have to be kept (we log a warn­ing for that).

Changes im­pact­ing client API

You no longer need com.atom­ikos.icatch.de­fault­_­max_wait­_­time_on_shut­down in your jta.prop­er­ties file. Be­ware that shut­down du­ra­tion is bound by the val­ue of com.atom­ikos.icatch.de­fault­_­max_­time­out - un­less you use the "forceShut­down" op­tion.

Fea­ture182107

Re­move user / pass­word prop­er­ties from Mes­sageDrivenCon­tain­er

De­scrip­tion

The user and pass­word prop­er­ties have been re­moved from com.atom­ikos.jms.ex­tra.Mes­sageDrivenCon­tain­er be­cause they were nev­er used any­way.

Tech­ni­cal de­tails

In­stances of this class del­e­gate to com.atom­ikos.jms.AtomikosCon­nec­tionFac­to­ryBean to cre­ate con­nec­tions. The lat­ter is also con­fig­ured with a user and pass­word, and those are the val­ues that are ac­tu­al­ly be­ing used.

As a re­sult, keep­ing two un­used prop­er­ties in the com.atom­ikos.jms.ex­tra.Mes­sageDrivenCon­tain­er class was con­fus­ing - so we have re­moved those.

Changes im­pact­ing client API

You need to re­move any ref­er­ences to these prop­er­ties from your con­fig­u­ra­tion.

Fea­ture199528

Drop reap­ing func­tion­al­i­ty from the pools

De­scrip­tion

We've re­moved the reap­ing func­tion­al­i­ty from the pools.

Tech­ni­cal de­tails

Reap­ing was when our pools would take away con­nec­tions that were be­ing held onto for too long.

His­tor­i­cal­ly, reap­ing func­tion­al­i­ty has caused more prob­lems / con­fu­sion than it solved. More­over, it was in­tend­ed to fix ap­pli­ca­tion-lev­el con­nec­tion leaks, mean­ing bugs in the ap­pli­ca­tion (as op­posed to bugs in our code base). We felt that be­came a source of need­less com­plex­i­ty.

We be­lieve that the cor­rect way of fix­ing ap­pli­ca­tion-lev­el con­nec­tion leaks is by fix­ing the ap­pli­ca­tion, rather than abrupt­ly reap­ing con­nec­tions away from that ap­pli­ca­tion. So our 6.0 re­lease seemed a good time to re­move that fea­ture.

Changes im­pact­ing client API

Re­move any ref­er­ences to reapTime­out from your con­fig­u­ra­tion.

Fea­ture201376

Bounce dub­bo ver­sion to avoid known vul­ner­a­bil­i­ties

De­scrip­tion

We've up­dat­ed the dub­bo ver­sion used in our prod­uct to avoid all known vul­ner­a­ble ver­sions.

Tech­ni­cal de­tails

At the time of pub­li­ca­tion of this re­lease, we have up­grad­ed to a dub­bo re­lease that is not marked as "vul­ner­a­ble" on this maven cen­tral page.

Changes im­pact­ing client API

None, oth­er than that your ap­pli­ca­tion prob­a­bly needs to up­grade to a high­er dub­bo ver­sion too.

Fea­ture201309

De­tect vul­ner­a­ble de­pen­den­cies on class­path

De­scrip­tion

We now help you find out about known vul­ner­a­ble maven de­pen­den­cies that your ap­pli­ca­tion is us­ing.

Tech­ni­cal de­tails

With cur­rent hack­er ef­forts mov­ing more and more into the ap­pli­ca­tion stack via vul­ner­a­ble open source de­pen­den­cies, we no­tice cus­tomers are get­ting wor­ried (or fac­ing au­dits of their ap­pli­ca­tions). Log4j, any­one?

Our ap­proach has been two-fold:

• We avoid 3rd par­ty de­pen­den­cies so you can't pull them in by ac­ci­dent, and
• We now also de­tect known vul­ner­a­ble 3rd par­ty maven de­pen­den­cies on your ap­pli­ca­tion's class­path

Start­ing in the near fu­ture, ex­pect more and more "se­cu­ri­ty up­dates" in that re­spect.

Changes im­pact­ing client API

None.

Fea­ture199539

Im­prove the pool's main­te­nance thread to check ALL con­nec­tions

De­scrip­tion

The pools's main­te­nance thread will now check all con­nec­tions - so pool sta­bil­i­ty im­proves.

Tech­ni­cal de­tails

Be­fore we only used to check con­nec­tions in the pool be­yond the minPoolSize. We now check all of them. This should im­prove sta­bil­i­ty of the pool.

Changes im­pact­ing client API

None.

Fea­ture200360

Sub­scrip­tion files are now re­quired for pro­duc­tion use

De­scrip­tion

We now re­quire cus­tomers to in­stall sub­scrip­tion files for pro­duc­tion use.

Tech­ni­cal de­tails

We've had some bad ex­pe­ri­ences with sub­scrip­tions pur­chased via re­sellers / in­ter­me­di­aries, that were first used by a de­vel­op­ment team, then moved onto oth­er teams in pro­duc­tion with­out us be­ing able to keep track. This has lead to un­pleas­ant ex­pe­ri­ences for both our cus­tomers and our­selves.

For more de­tails, see this doc­u­men­ta­tion page.

Changes im­pact­ing client API

You need to in­stall 2 files as ex­plained on the doc­u­men­ta­tion page men­tioned above. Note: de­vel­op­ment or test­ing use does not need sub­scrip­tion files, so take your time to plan go­ing live

Fea­ture193843

One gener­ic hazel­cast mod­ule for ver­sions 3, 4 and 5

De­scrip­tion

You can now use the same mod­ule trans­ac­tions-hazel­cast for Hazel­cast ver­sions 3, 4 and 5.

Tech­ni­cal de­tails

We used to have a sep­a­rate hazel­cast mod­ule called trans­ac­tions-hazel­cast4 that was need­ed for ver­sions 4 and 5.

This was not nec­es­sary so we have con­sol­i­dat­ed all func­tion­al­i­ty in one gener­ic mod­ule: trans­ac­tions-hazel­cast.

Changes im­pact­ing client API

Up­date your de­pen­den­cies to use trans­ac­tions-hazel­cast in­stead of trans­ac­tions-hazel­cast4.

Bug197505

Avoid that de­faults in the Spring Boot starter over­ride jta.prop­er­ties

Sever­i­ty:	4
Af­fect­ed ver­sion(s):	5.0.x

De­scrip­tion

You can now count on the prop­er­ty val­ues from jta.prop­er­ties to be tak­en into ac­count even with Spring Boot.

Tech­ni­cal de­tails

The Atomikos JTA prop­er­ties im­ple­men­ta­tion in our Spring Boot starter would de­fine de­fault val­ues for many prop­er­ties, mean­ing that their val­ue spec­i­fied jta.prop­er­ties would not be tak­en into ac­count. This has now been fixed.

Changes im­pact­ing client API

Your prop­er­ties spec­i­fied in jta.prop­er­ties should now work.

Bug197362

Clar­i­fy mes­sage if rest port not set in client

Sever­i­ty:	1/2/3/4
Af­fect­ed ver­sion(s):	5.0.x

De­scrip­tion

You can now count on a bet­ter er­ror mes­sage when the AtomikosRestPort URL is not set (for trans­ac­tions across re­mot­ing calls).

Tech­ni­cal de­tails

When the AtomikosRestPort URL was not set, the client tem­plate would re­port a mis­lead­ing mes­sage say­ing that there is no trans­ac­tion for the thread. In­stead, the root cause is a URL that is miss­ing - so we fixed that for you.

Changes im­pact­ing client API

None.

Bug197506

Sup­port di­a­mond case ar­chi­tec­tures for read­On­ly re­mot­ing

Sever­i­ty:	4
Af­fect­ed ver­sion(s):	5.0.x

De­scrip­tion

You can now use tran­si­tive read­On­ly re­mot­ing trans­ac­tions in all cas­es.

Tech­ni­cal de­tails

As out­lined in this GitHub is­sue there was a prob­lem with read­On­ly in­vo­ca­tions when:

• the same shared ser­vice was called over dif­fer­ent paths, and
• all in­vo­ca­tions were read­On­ly

This is known as a "di­a­mond case" be­cause the in­vo­ca­tion di­a­gram looks like a di­a­mond.

This is­sue has been fixed in the fol­low­ing way: our prod­uct will now avoid the read­On­ly op­ti­mi­sa­tion in this spe­cif­ic sce­nario. This is still cor­rect, at a mi­nor per­for­mance over­head in the ex­ot­ic cas­es where this does hap­pen.

Changes im­pact­ing client API

None.

Bug200555

Also close Cal­lable- and Pre­paredS­tate­ments when JDBC con­nec­tion is closed

Sever­i­ty:	4
Af­fect­ed ver­sion(s):	5.0.x

De­scrip­tion

Now you can close a JDBC con­nec­tion and also have the Cal­lable- and Pre­paredS­tate­ments closed au­to­mat­i­cal­ly.

Tech­ni­cal de­tails

When a JDBC con­nec­tion is closed by the ap­pli­ca­tion (re­turned to the pool) then the JDBC spec­i­fi­ca­tion re­quires all pend­ing state­ments to be closed as well.

We sup­port­ed this, but ap­par­ent­ly this was not done for all state­ment types. We fixed this now.

This is­sue is marked as sever­i­ty 4 (de­vel­op­ment use) be­cause we had no real bug re­ports from any cus­tomers. It was some­thing we no­ticed dur­ing a code re­view.

Changes im­pact­ing client API

None.

Bug197253

Sus­pend/re­sume should not change lo­cal sib­ling count

Sever­i­ty:	2
Af­fect­ed ver­sion(s):	5.0.x

De­scrip­tion

You can now use @Re­quiresNew with im­port­ed trans­ac­tions.

Tech­ni­cal de­tails

As ex­plained in this GitHub is­sue, there were prob­lems when a re­mote trans­ac­tion was im­port­ed and then sub­se­quent­ly called lo­cal log­ic that was marked with @Re­quiresNew. As re­quired by the spec­i­fi­ca­tion of @Re­quiresNew, this would sus­pend any ac­tive trans­ac­tion - and re­sume it lat­er.

Our code had a side ef­fect of sus­pend/re­sume that changed the lo­cal sib­ling count.

Si­b­ling counts help de­tect or­phaned in­vo­ca­tions (and their trans­ac­tion­al up­dates to per­sis­tent stor­age) that arise out of lost replies. For in­stance, con­sid­er this sce­nario with ser­vices A and B:

1. A starts a trans­ac­tion.
2. A calls B as part of that trans­ac­tion.
3. B does work and re­turns a re­sult.
4. A does not re­ceive the re­sult due to a net­work time­out (so B now has an or­phaned in­vo­ca­tion).
5. A tries again, so B per­forms the changes again and re­turns a new re­sult (in the same trans­ac­tion).
6. A com­mits the trans­ac­tion think­ing it only up­dat­ed B once.
7. B com­mits the same trans­ac­tion with two sets of up­dates.

This risk here is the dif­fer­ent views of A and B re­gard­ing the scope of the trans­ac­tion: A thinks it com­mits one up­date to B, where­as B com­mits two dif­fer­ent up­dates. This can be a prob­lem for data con­sis­ten­cy, so we avoid this by keep­ing sib­ling counts at B and A. A con­structs its sib­ling count pic­ture with each re­sult it ac­tu­al­ly re­ceives with its replies from A. Be­fore com­mit, A pass­es on the "count" it has for in­vo­ca­tions at B, and if B finds that there is no match then it re­fus­es to com­mit.

This would avoid the prob­lem out­lined above, be­cause in step 4 ser­vice A will miss a count, so in step 6 ser­vice A will pass a count of 1 for ser­vice B, where­as B will see 2 and re­fus­es the com­mit process.

In short, sib­ling counts have their pur­pose. How­ev­er due to a bug, this was af­fect­ed by a sus­pend/re­sume at ser­vice B (when it has @Re­quiresNew log­ic in­side).

Changes im­pact­ing client API

You should now be able to con­fig­ure @Re­quiresNew on any ser­vice that needs it.

Bug197240

Al­low spring.jta prop­er­ties in Spring Boot starter

Sever­i­ty:	4
Af­fect­ed ver­sion(s):	5.0.x

De­scrip­tion

Any spring.jta prop­er­ties in Spring Boot should now be tak­en into ac­count.

Tech­ni­cal de­tails

After the Spring Boot team con­tributed the source code for their Atomikos starter we thought it was safer to ig­nore any prop­er­ties with the "lega­cy" pre­fix spring.jta.atom­ikos.prop­er­ties (in your ap­pli­ca­tion.prop­er­ties file for Spring Boot).

This has proven to con­fuse users, so we now take such spring.jta prop­er­ties into ac­count.

Changes im­pact­ing client API

Any spring.jta prop­er­ties in Spring Boot should now be tak­en into ac­count.

Bug200925

Im­prove han­dling of null xare­source

Sever­i­ty:	3
Af­fect­ed ver­sion(s):	3.9.x, 4.0.x, 5.0.x

De­scrip­tion

We've re­fined how we deal with lost XA con­nec­tions dur­ing the com­mit phase.

Tech­ni­cal de­tails

Some con­nec­tion is­sues would lead to need­less heuris­tic ex­cep­tions dur­ing com­mit, in par­tic­u­lar when the com­mit was 1-phase (where fail­ure to reach the back­end re­sults in re­source-in­ter­nal roll­back any­way).We have now re­fined this so there are no need­less heuris­tic ex­cep­tions any more in these cas­es. At the same time, we have also tried to min­imise the num­ber of cas­es where such con­nec­tion is­sues re­main.

Changes im­pact­ing client API

None.

Bug201164

Avoid Con­cur­ren­tMod­i­fi­ca­tionEx­cep­tion dur­ing trace log­ging in the pool

Sever­i­ty:	4
Af­fect­ed ver­sion(s):	5.0.x

De­scrip­tion

You can now use our pools with TRACE log­ging and get less ex­cep­tions.

Tech­ni­cal de­tails

The is­sue de­tails are de­scribed in this GitHub is­sue.

Changes im­pact­ing client API

None.

Is­sue201646

Spring Boot 2 starter: also add jta and jms ver­sions of Spring Boot's POM to the starter project

Sever­i­ty:	4
Af­fect­ed ver­sion(s):	6.0.x

De­scrip­tion

Un­like Spring Boot 3 sup­port, we did not yet add the JMS and JTA de­pen­den­cies in the Spring Boot 2 starter.

Tech­ni­cal de­tails

We still have to add the JMS and JTA de­pen­den­cies in the Spring Boot 2 starter. This is need­ed be­cause of the re­moval of tran­si­tive de­pen­den­cies. Un­til then, you will have to add them your­self.

About Sever­i­ty

The sever­i­ty lev­els we use are de­fined in our sup­port terms and con­di­tions.